CNC Turning

PDFPrintE-mail

 

Specializing in large diameter or long parts. Maximum gap lathe, turning 6' diameter with 5' length. Turning over bed ways. 26" x 140". cnc-operator-320

Specializing in single to short runs of larger components. Advance is well-equipped with three state-of-the-art CNC Boehringer turning lathes, the largest of which can handle an 28-inch diameter part up to 8 feet in length between centers.

See a few of our machined parts.

Specializing in 3 and 4 CNC axis horizontal and vertical machining.

Horizontal Machining Center: Pratt & Whitney horizontal 4 axis has a new retrofitted CNC control. 30" x 42" x24".

Vertical Machining Centers
: (1) Hurco VMX - 50" x 20", (1) Hurco 40SLV - 40" x 20" and (2) Hurcos - BMC - 30" x 17".

 

Advance Products Corporation | 2527 N. M-63 | Benton Harbor, Michigan 49022 | 269-849-1000
© 2012 Advance Products Corporation